The main performance parameters 6YL-100-type screw press of the main technical parameters: 1, pressing shaft speed: 30-40 rev / min 2, rotation of the gear box ratio: 15/40 * 15/55 = 1: 9.78 3, equipped with Power: 7.5KW 4, Dimensions: length / width / height (mm) 1640/640/1200 5, stand-alone weight: about 480kg First, the working principle and structure: 1, the working principle: press operation, will deal with Embryos with such good material hopper, oil squeezed from the hopper into the chamber. Yuri pressing screw spiral to advance, be pressed. Because parison of virgin bore in the press is in the operation state, in pressing bore pressure conditions, feed embryo and pressing screw, with great friction between pressing bore. This enables the material embryo and embryo friction material, resulting in relative motion. Put another face, pressing bolts of root diameter is gradually thickening when pressing screw is rotated, so that the thread material that is able to move forward embryos can flip outward, while pressing the material layer near the surface of the screw thread with juice axis, so that pressing bore in each parison particle motion velocity is not the same direction. The particles also exist between the relative motion. There is heat generated by friction and meet on a heat oil extraction process operation must, help to promote material embryo protein thermal denaturation, destruction of colloids, increasing the plasticity, but also reduces the viscosity of the oil, easily squeeze the oil come, thus increasing the oil yield oil press. Website: www.shuangxiang.net www.zhayouji6.com QQ: 859360511 l Contact: 15,518,059,959 03,948,380,959